Deka Unigy II, Инструкция по установке и эксплуатации

Страница: 1 / 20

Installation and Operation Manual
SECTION I
Safety Precautions
Protective Equipment ..........2
Procedures ..........................2
SECTION II
Receiving & Storage
Receiving Inspection............2
Unpacking ............................2
Storage ................................3
SECTION III
Installation
Electric Code for
Maintenance Access............3
Floor Anchoring &
Module Arrangements..........3
Module Installations ............3
SECTION IV
Electrical Connection
Connector Assembly............4
Terminal Assembly ..............4
Final Assembly
Check Procedure ..............4-5
TABLE OF CONTENTS
®
FLUSH EYES
IMMEDIATELY
WITH WATER.
GET
MEDICAL
HELP
FAST.
SULFURIC ACID
CAN CAUSE
BLINDNESS OR
SEVERE BURNS.
NO
• SPARKS
• FLAMES
• SMOKING
SHIELD
EYES.
EXPLOSIVE GASES
CAN CAUSE BLIND-
NESS OR INJURY.
HIGH
VOLTAGE...
RISK OF SHOCK.
DO NOT TOUCH
UNINSULATED
TERMINALS OR
CONNECTORS.
KEEP VENT CAPS TIGHTLY IN PLACE.
VENTILATE WELL WHEN IN AN ENCLOSED
SPACE AND WHEN CHARGING.
SEE INSTALLATION, MAINTENANCE AND OPERATION
INSTRUCTIONS FOR IMPORTANT SAFETY PRECAUTIONS.
REPAIR SHOULD BE PERFORMED ONLY
BY A QUALIFIED SERVICE TECHNICIAN.
DANGER
Required by
California
Proposition 65
BATTERIES
AND RELATED PARTS
CONTAIN LEAD
California Proposition 65 Workplace Warning Sign 1/99
Must be posted in workplace near batteries.
WASH HANDS
AFTER HANDLING !
WARNING: Battery posts, terminals and related accessories
contain lead and lead compounds, chemicals known to the
State of California to cause cancer and reproductive harm.
WARNING: Battery posts, terminals and related accessories
contain lead and lead compounds, chemicals known to the
state of California to cause cancer and birth defects or other
reproductive harm.
Wash hands after handling.
SECTION IV (cont.)
Electrical Connection (cont.)
Parallel Strings ....................5
Module Front Shield
Assembly ............................6
Terminal Plate Shield
Assembly ............................6
Module Top Shield
Assembly ............................6
SECTION V
System Operations
Float Voltages ......................6
Operating Temperatures ....6
Equalizing ............................6
SECTION VI
Record Keeping
Voltages, Temperatures
& Micro-ohm Readings ....6-7
SECTION VII
Maintenance
Annual Inspection ................7
Battery Cleaning ..................7
Capacity Testing ..................7
SECTION VIII
Cell Removal
Procedure ............................7
FIGURES ............................8-12
APPENDIX A
Relay Rack
Assembly ......................13-14
APPENDIX B
Material Safety
Data Sheet ....................15-16
APPENDIX C
Battery Maintenance
Report..................................17
APPENDIX D
Technical
Information ....................18-20