Deitz Pharmafill NB1, Руководство по эксплуатации

Страница: 43 / 87

2022-03-08 Pharmafill Model NB1
Deitz Company Inc. NB1 User Manual Page 37
Section 8 – SET UP (cont’d)
15. TAMPER BRACKET - ensures material will arrive at its final position for consistent band application.
a. Standard Bracket
•
Place bottle with band material on the conveyor.
•
Loosen Tamper Bracket knob and raise Tamper Bracket to allow bottle to pass underneath.
•
Lower bracket so the lowest point is just above the top of the band material, not touching it.
•
Tighten Tamper Bracket knob.
b. Tall/ Dropper Bracket- The Plunger Bar can only travel as far as the top of the bottle, despite the
final position of the top of the band being lower than that (such as on a dropper bottle).
•
Place bottle with band material on the conveyor.
•
Loosen Tamper Bracket knob and raise Tamper Bracket to allow bottle to pass underneath.
•
Lower bracket so the lowest point is just above the top of the band material, but high enough
that the top of the dropper will pass through the gap.
•
Tighten the Tamper Bracket knob.
STANDARD
TAMPER BRACKET
TALL/DROPPER
TAMPER BRACKET