background image

6. Regulatory notices

 6.1  Europe

Hereby, deister electronic GmbH declares, that this equipment - if used according to the 
instructions - is in compliance with the essential requirements and other relevant provisions 
of the RTTE Directive 1999/5/EC.

A full declaration of conformity can be requested at:

[email protected]

Approved for use in all European countries.

 6.2  FCC Digital Device Limitations

Radio and Television Interference

This equipment has been tested and found to comply with the limits for a digital device, 
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable 
protection against harmful interference when the equipment is operated in a commercial 
environment. This equipment generates, uses and can radiate radio frequency energy and, 
if not installed and used in accordance with the instruction manual, may cause harmful 
interference to radio communications. Operation of this equipment in a residential area is 
likely to cause harmful interference, in which case the user will be required to correct the 
interference at his own expense.

This device complies with Part 15 of the FCC rules. Operation is subject to the following 
two conditions: (1) This device may not cause harmful interference, and (2) this device 
must accept any interference received, including interference that may cause undesired 
operation.

In order to maintain compliance with FCC regulations, shielded cables must be used with 
this equipment. Operation with non-approved equipment or unshielded cables is likely to 
result in interference to radio and television reception.

Caution! Changes or modifications not expressly approved by the manufacturer could void 
the user´s authority to operate this equipment.

18

deister electronic GmbH  30890 Barsinghausen  Germany

 V27/09/07

UDL5 - UHF mouse 

· 

Quick start manual

Содержание UDL5























Отзывы: