- 03 -
Technical Specification
Name: DEIK 18V
Battery voltage See product rating label
Run time: app 35 mins
Charge time 3~5 hours
Weight 2.3kg
Dust bin capacity 0.4L
Accessories
Pre-motor filter
2-in-1 Tool
Subject to technical change without notice. Images are illustrative only.
Getting started
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Before you begin
CAUTION:
Always switch off the vacuum cleaner before connecting or disconnecting the handheld/attachments or
removing and emptying the dirt container.
IMPORTANT:
The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does overheat
the thermostat will automatically turn the vacuum cleaner off. If this happens, switch the vacuum cleaner off. Remove and
empty the dirt container. Also check the vacuum cleaner for blockages. Allow the vacuum cleaner to cool for approximately
1 hour (if you have cleaned the filter please wait 24 hours for the filter to fully dry before putting back into the machine). For
best cleaning results, filters require cleaning every 4-6 uses or as needed depending upon use. If the vacuum cleaner is
blocked, switch off before removing the blockage.
Assembling your 2-in-1 vacuum cleaner
Line up the handle with the
main body and lower into
place.
Insert the screw into the
back of the handle. Using a
cross head screw driver
tighten until the handle is
secured into place.
Line up the handheld nozzle
with the back of the main
body. Push the handheld onto
the main body until it clicks
into place.
Store the 2-in-1 Tool on
board the vacuum cleaner
by pushing the tool firmly
into the tool holder located
on the back of the handle.
