SIM-Q MKII
Installation/operation instructions
DEIF A/S
Page 3 of 18
1 General information
1.1
Warnings, legal information and safety
1.1.1 Warnings and notes
Throughout this document, a number of warnings and notes with helpful user information will be
presented. To ensure that these are noticed, they will be highlighted as follows in order to
separate them from the general text.
Warnings
Warnings indicate a potentially dangerous situation, which could result in death,
personal injury or damaged equipment, if certain guidelines are not followed.
Notes
Notes provide general information, which will be helpful for the reader to bear in mind.
1.1.2 Legal information and disclaimer
DEIF takes no responsibility for installation or operation of the product. If there is any doubt about
how to install or operate the product, please contact DEIF.
The unit is not to be opened by unauthorised personnel. If opened anyway, the warranty
will be lost.
Disclaimer
DEIF A/S reserves the right to change any of the contents of this document without prior notice.
The English version of this document always contains the most recent and up-to-date information
about the product. DEIF does not take responsibility for the accuracy of translations, and
translations might not be updated at the same time as the English document. If there is a
discrepancy, the English version prevails.
1.1.3 Safety issues
Installing and operating the unit may imply work with dangerous currents and voltages. Therefore,
the installation should only be carried out by authorised personnel who understand the risks
involved in working with live electrical equipment.
Be aware of the hazardous live currents and voltages. Do not touch any AC
measurement inputs as this could lead to injury or death.
1.1.4 Electrostatic discharge awareness
Sufficient care must be taken to protect the terminal against static discharges during the
installation. Once the unit is installed and connected, these precautions are no longer necessary.
1.1.5 Factory settings
The product is delivered from factory with certain factory settings. These are based on average
values and are not necessarily the correct settings for the product. Precautions must be taken to
check the settings before running the product.
