GC-1F
Operator’s
Manual
DEIF A/S
Page 8 of 11
I
:
Start engine (local (not auto)) running mode.
O
:
Stops the engine instantaneously. If the unit is in AUTO mode, the mode will change to
MAN and the engine will stop.
AUT
: AUTO running mode selector.
MAN
: Manual running mode selector.
TEST
: Initiates the test sequence selected for the push-button.
:
Lamp test. One push will illuminate all LEDs for 3 seconds.
ESC
: Jumps from parameter settings to display. Removes pop-up messages.
:
Resets horn relay. Extra function: Press and hold button 2 sec. to see alarm list.
▲
:
Normal display: Scrolls the display up once. Programming: Increases setpoint value.
▼
:
Normal display: Scrolls the display down once. Programming: Decreases setpoint value.
:
Enters value/acknowledges alarm.
: Breaker closes.
: Breaker opens.
LED functions
Power
:
Power OK indicator.
Alarm
:
Flashing: Active, non-acknowledged alarm(s) present.
Steady:
Active, acknowledged alarm(s) present.
U/f OK generator.
Generator breaker
ON.
Running feedback
present.
ON in AUTO
mode.
ON in manual
mode.
Additional alarm
indication LEDs:
On when the confi-
gured alarm or con-
dition is present (for
more information, see
relay configuration).
AUT
TEST
ESC
