DPS-1 Installation and operation instructions 4189360002 Rev. C
Introduction
Page 4 of 14
1.
Introduction
This document describes how to install and operate the DPS-1. The document is intended for
persons responsible for integration of the DPS-1 in a pitch system, cabinet design, installation
and operation.
For detailed information about specifications and functions of the DPS-1, refer to DPS-1
datasheet.
It is recommended to print this manual in colour in order to get most information out of the
pictures and illustrations.
1.1
Revision history
Apart from editorial changes the following changes have been made in this revision:
Date
Revision Changes
2017-06-27
C
Total revision of document content.
2012-12-14
B
New document
N/A
A
Not used
1.2
Conventions
The following conventions are used in this document:
Used in document
Description
A yellow symbol that illustrates hazard type (this symbol is an example for
general hazard). There are different types such as electrical, chemical and so
on.
Danger!
A signal word used to indicate an imminently hazardous situation, which if not
avoided, will result in death or serious injury. (ISO 3864)
Warning!
A signal word used to indicate an imminently hazardous situation, which if not
avoided, could result in death or serious injury. (ISO 3864)
Caution!
A signal word used to indicate a potentially hazardous situation, which if not
avoided, could result in minor or moderate injury. (ISO 3864)
A blue symbol illustrates a need for mandatory action. In this example read
instructions. Other types of blue symbols exist and always indicate mandatory
action.
A symbol used to draw attention to extra information or an action that is not
mandatory
