Dispose of batteries
Battery: MATSUSHITA/
PANASONIC 3V 50mAh
Vanadium Lithium
Rechargeable Battery
type VL2330/1HF
Com 1 (DB-9 female)
Pin
Description
1 RD-422 TXD+/RS-485+
2
RS-232 RXD
3
RS-232 TXD
4
RS-422 RXD+
5
GND
6
RS-422 TXD/RS-485-
7
RS-232 RTS
8
RS-232 CTS
9
RS-422 RXD-
Com 2 (DB-9 male)
Pin
Description
1
2
RS-232 RXD
3
RS-232 TXD
4
5
GND
6
7
RS-232 RTS
8
RS-232 CTS
9
Optional 5V output
Battery
Connections
Dispose of batteries according to local regulations.
The products have been designed for use in an industrial
environment in compliance with the 2004/108/CE directive.
The products have been designed in compliance with:
EN 61000-6-4
EN 55011 Class A
EN 61000-6-2
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-4-8
EN 61000-4-11
The installation of these devices into the residential, commercial
and light-industrial environments is allowed only in the case that
special measures are taken in order to get the conformity to IEC-
61000-6-3.
Reproduction of the contents of this copyrighted document,
in whole or part, without written permission of DEIF A/S is
prohibited.
DEIF reserves the right to change any of the above.
DEIF A/S · Frisenborgvej 33 · DK-7800 Skive
Tel.: +45 9614 9614 · Fax: +45 9614 9615
[email protected] · www.deif.com
Due to our continuous development we reserve the right to
supply equipment which may vary from the described.
Do not cut out area, backside contains text.
Mark with a pen or a sharp item in each corner
×
×
×
×
Drill template AGI 107
Document no.: 4189340623B
Document no.: 4189340623B
5
6
5
HWMANV001 V.1.1
Connections
Com 1 (DB-9 Female)
Pin
Description
1
RD-422 TXD+ / RS-485+
2
RS-232 RXD
3
RS-232 TXD
4
RS-422 RXD+
5
GND
6
RS-422 TXD- / RS-485-
7
RS-232 RTS
8
RS-232 CTS
9
RS-422 RXD-
7
HWMANV001 V.1.1
6
HWMANV001 V.1.1
8
Download Cable
Dispose of batteries
Battery
Battery
MATSUSHITA/PANASONIC 3V 50mAh Vanadium Lithium Rechargeable Battery type
VL2330/1HF
Dispose of batteries according to local regulations.
The products have been designed for use in an industrial environment in compliance with the
2004/108/CE directive.
The products have been designed in compliance with:
EN 61000-6-4 EN 55022 Class A
EN 61000-6-2
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-4-8
EN 61000-4-11
The installation of these devices into the residential, commercial and light-industrial environments is
allowed only in the case that special measures are taken in order to get the conformity to IEC-61000-
6-3.
Reproduction of the contents of this copyrighted document, in whole or part, without written
permission of Cermate Technologies Inc., is prohibited.
HWMANV001 V.1.1 01.10.2009
Copyright © 2009 Cermate Technologies Inc.
7F-1, No.168, Lien Cheng Rd., Chung-Ho City, Taipei County, Taiwan
www.cermate.com
Com 2 (DB-9 Male)
Pin
Description
1
2
RS-232 RXD
3
RS-232 TXD
4
5
GND
6
7
RS-232 RTS
8
RS-232 CTS
9
Optional 5V output
Com1 Connector
9Pin Male
PC Connector
9Pin Female
RXD 2
TXD 3
SG 5
3 TXD
2 RXD
5 SG
Com2 Connector
9Pin Female
PC Connector
9Pin Female
RXD 2
TXD 3
SG 5
3 TXD
2 RXD
5 SG
Com3 Connector
Terminal Block
PC Connector
9Pin Female
RXD
TXD
GND
3 TXD
2 RXD
5 SG
Com2(5 pins)
Com2(4 pins)
Com3(6 pins)
Panel fixing
Screw each fixing screw until the bezel corner gets in contact with the panel.
Power supply
Powered by a Low Voltage / Limited Energy power source
.
Do not open the rear cover of the panel when power is applied
.
Ensure that the power supply has enough power capacity for the
operation of the equipment
.
Items
Models
Power
consumption
PV037
PV035
24VDC±10%
；
6W
PV057
PV058
24VDC±10%
；
10W
PV070
24VDC±10%
；
15W
PV080
；
PV084
PV104
；
PV121
24VDC±10%
；
20W
422
485
422
485
RS-232
Fixing Screw
