11
©
1999 Directed Electronics, Inc.
Programming Options
Programming options control what your system does during nor-
mal operation, and require little or no additional parts. However,
some may require additional installation labor.
The following is a list of the program settings, with the factory
settings in
bold
:
■
Active
arming (only with the transmitter) or passive arming
(automatic arming 30-seconds after closing the last door).
■
Arming/disarming confirmation siren chirps
on
or off.
■
Passive door locking (with passive arming). This feature only
works if passive arming has been turned on.
■
Valet Pulse Count: The number of pulses of the valet/program
switch required to disarm the security system are programma-
ble from one to five pulses. The default setting is
one pulse
.
■
Siren Tones and Chirp Volume: The output of the soft chirp siren
consists of six different tones in sequence. Any of these tones
can be eliminated by your dealer, resulting in a unique, easily
identifiable siren sound. The chirps can either be full volume or
six decibels quieter
than the full alarm blast.
■
Siren duration: The length of the triggered sequence can be pro-
grammed for
30
or 60 seconds.
■
Door Trigger
Instant
or delayed: In the standard configuration
the unit will provide a progressive response if the door is
opened while the system is armed. The siren will chirp and the
parking lights will flash for a few seconds followed by a full trig-
