background image

11

©

1999 Directed Electronics, Inc.

This feature allows you to remotely start and run your vehicle for

a programmable period of time. This makes it possible to warm up

the engine, as well as adjust the interior temperature of the vehi-

cle with the climate control system. If interior heating or cooling

is desired, the climate controls must be preset, and the fan blower

must be set to the desired level prior to remote starting the

vehicle.

IMPORTANT! 

(1) Never remote start your vehicle when the keys are in

the ignition, except when performing Valet

®

Take-Over, and (2) Never

start the vehicle if it is not in either PARK or NEUTRAL.

To remote start the vehicle: 

1.

Simultaneously press 

and 

on the transmitter for one

second. 

2.

The parking lights will flash to confirm that the vehicle will

attempt to start.

3.

Release the 

and 

buttons as soon as the parking

lights flash. (In gasoline vehicles, the engine will start 4 sec-

onds after the parking lights flash. In diesel vehicles, the

engine will start when the WAIT-TO-START indicator on the

vehicle's dash goes out.) 

3.

Once the vehicle has started, it will run for the pre-program-

med period of time (either 12, 24, or 60 minutes - see

Programming Options section of this guide) or until a shut-

down input is triggered. 

Remote Start

Содержание 552T


























Отзывы: