DEI 1100d, Руководство пользователя, Страница: 14 / 16

12
© 1999 Directed Electronics, Inc
SPECIFICATIONS 600D/1100D
275 425
watts watts
0.4% 0.5%
model 600d 1100d
Signal-to-Noise Ratio Greater than 85 dB
Frequency Response 20-250 Hz +0, -1 dB
Damping Factor 50 (typical)
Crossover Low-pass 18 dB/octave,
variable from 30 to 250 Hz
Subsonic Filter Switchable 18 dB/octave,
variable from 20 to 250 Hz
Bass Equalization +8 dB, centered at 40Hz
Input Impedance 20K ohms
Input Sensitivity Variable from 150 mV to 8 volt
Output Impedance 1 to 4 ohms
Supply Voltage 10 to 16 VDC
Fusing and Power 60A 80A
Cable Requirements (AWG) #8 #4
(Per amp, trunk mounted)
750 1400
watts watts
400 750
watts watts
0.6% 0.75%
600 1100
watts watts
0.8% 0.9%
800 1500
watts watts
1200 2200
watts watts
RMS continuous power
driven into 4 ohms from 20 to 250 Hz
@ 14.4 VDC THD at rated power/load
RMS continuous power
driven into 2 ohms from 20 to 250 Hz
@ 14.4 VDC THD at rated power/load
RMS continuous power driven into 1 ohm from 20 to 250 Hz
@ 14.4 VDC THD at rated power/load
Dynamic power rating
(IHF-202 Standard) at minimum load
RMS continuous power
driven into 4 ohms from 20 to 250 Hz
@ 14.4 VDC in synced bridge mode (two 600d)
RMS continuous power driven into 2 ohms from 20 to 250 Hz
@ 14.4 VDC in synced bridge mode (two 1100d)