DEHACO DTS170 EU, Руководство пользователя

Страница: 8 / 16

8 Dehaco B.V. • Kruisbaak 25 • 2165 AJ Lisserbroek (NL) •
✆
+31 (0)88 - 20 20 600 •

info@dehaco.nl • www.dehaco.nl
7. Transport & Storage | 8. Get started!
7. TRANSPORT & STORAGE
7.1 Transport
CAUTION!
Ø
Remove the blade from the stripper prior to
transport! Think of your safety.
- Due to the compact dimensions and low own
weight, it is possible to use a car trailer or van
to supply and remove the Floor stripper.
- Loading and unloading can be performed with
a ramp and the machine’s own drive.
- A crane hook has been provided for using
lifting tools.
- In order to save space, it is possible to remove
the handle (tiller head). Use the provided 8mm
socket head wrench for this.
7.2 Opslag
When decommissioning the DTS170 Floor stripper for
a longer period of time, it is recommended to perform
the following actions:
STORAGE!
Ø
Do NOT clean the Floor stripper with a high-
pressure cleaner! Cleaning with compressed air!
- Neatly clean the machine.
- Perform maintenance, see section 9.
- Store the machine in a dry, preferably
frost-free room.
- Cover the machine, if possible.
8. GET STARTED!
CAUTION!
Check in advance that there are NO bolts, screws or
threaded ends protruding from the floor. This could
damage the strip mechanism.
8.1 Get started
CAUTION!
Ø
Before you connect a power cord, you must first
check it for damages!
CAUTION!
Ø
The Floor stripper can be moved manually by
tilting the machine backwards, so that it is
supported by the transport wheels.
CAUTION!
Ø
The hard steel blades are very sharp!!
Ø
Proceed carefully when installing and removing
the blade!
CAUTION!
Ø
Check that the power supply and converter are
suitable for the machine!
- Check that the tiller and the plug of the tiller
head cord are properly fastened.
- Mount the counter-weight plates and fasten
them properly. The bolt heads should go in the
blind holes, so they do not protrude! Use the
provided 8 mm socket head wrench for this.
- Carefully select a strip blade type: see box to
the left. The correct strip blade that is suitable
for the work will save you a lot of time and
ensure a better end result!!
- Place a blade in the blade holder and properly
fasten the clamping plate using the 6 mm
socket head wrench.
- Insert the power cord in the counter plug on
the stripper.
The Floor stripper is now ready for use.
Guidelines for selecting the
correct strip blade:
-
In case of a concrete floor, keep
the bevelled side of the blade at
the top.
-
In case of a wooden (soft)
subfloor, it may be better to
turn the blade around, due to
the adapted cutting angle.
-
In case of a soft subfloor, select a blade with a
15° angle
-
In case of hard material, select a narrower
blade
-
In case of carpet, for instance, select a U blade
to cut loose strips of material
-
Use your experience and/or consult with your
supplier to determine which blade model is
most suitable for your application.