Degonda-Rehab SA TwistT4, Руководство по эксплуатации

Страница: 20 / 48

- 19 -
Fault Codes and Diagnosis Codes
If the electronics should indicate a malfunction, please refer to the following fault finding
guide in order to locate faults.
Fault Signal Fault Indication - Action
1 LED blinks
– low battery voltage
Check the condition and the connections of the batteries
2 LEDs blinking
–left drive motor not connected Check the wiring of
the left drive motor
3 LEDs blinking
– short circuit of the left drive motor Check the plug
connection of the left drive motor
4 LEDs blinking
– right drive motor not connected Check the wiring
of the left drive motor
5 LEDs blinking
– short circuit of the right drive motor Check the
plug connection of the left drive motor
6 LEDs blinking
– battery charger connected Remove the plug
connector of the battery charger
7 LEDs blinking
– joystick fault
Switch on the control on the control panel without the simultaneous
movement of the joystick
8 LEDs blinking
– fault in the control system Check the cable
connections for plug contact and damage
9 LEDs blinking
– disengagement of the drive motors Check the
disengagement of both drive motors
10 LEDs blinking
– high battery voltage
Avoid downhill journeys, instead switch on a power consumer (for
example, lights, seat adjuster, uphill journey)
7+5 LEDs blinking
– communication fault
Check the cable connections for good plug contact and damage
Seat adjustment indicator
– seat adjustment fault
Check all available electrical seat adjusters for
correct function