18.04.2018
ASSEMBLY INSTRUCTIONS MLD CONTROL EK-S1
Page 11
2.4.2
LED
assignments
Part Code Assignment
Function
Multi-Color-
LED
DA1
Motor 1 active
Green: Moving to face west
Red: Moving to face east
LED off: motor is off
X
DB1
Motor 2 active
Green: Moving to face west
Red: Moving to face east
LED off: motor is off
X
DC1
MLD sensor
Green: Irradiation west predominant
Red: Irradiation east predominant
X
DD1
Snow sensor
Off: No sensor registered
Green: Sensor connected and OK
Red: Snow alarm activated
Red Slow Flash: Moving to unload position
Red Fast Flash: Sensor fault
X
DE1
Joystick manualcontrol
Red: Joystick plugged in and active
Red Fast Flash: Joystick error
X
DF1
CTC manualcontrol
Green: CTC move to face west
Red: CTC move to face east
Off: No command from CTC
X
DG1
Wind sensor
Off: No sensor registered
Green: Sensor connected and OK
Red: Wind alarm activated
Red Slow Flash: Waiting for wind alarm
end Red Fast Flash: Sensor fault
X
D29
Inclinationsensor 2
On: Sensor ok
Flashing: Sensor error
D31
Inclinationsensor 1
On: Sensor ok
Flashing: Sensor error
D35
Motor 2 status
Off: Motor ok
On: Motor error, defective
Flashing: Motor waits until next attempt
D41
Motor 1 status
Off: Motor ok
On: Motor error, defective
Flashing: Motor waits until next attempt
D43
System status
Off: System status ok
On: Excessive heat, Motor stopped
Flashing: System waits for ok
D64
Controller power
On: Microcontroller voltage ok
Fast Flash: Power error
D65
MLD sensor power
On: MLD sensor voltage ok
Fast Flash: Power error
D66
Motor power
On: Motor voltage ok
Fast Flash: Power error
D67
Bus power
On: Bus voltage ok
Slow Flash: Data transfer
Fast Flash: Power error