Page 10
Troubleshooting
Record in the space below the listed information
for future reference.
SERIAL NUMBER……………………………..
DATE OF PURCHASE………………………..
PURCHASED FROM…………………………..
…………………………………………………...
Please register your product at
www.defy.co.za
DEFY APPLIANCES (PTY) LTD
P.O.BOX 12004
JACOBS
DURBAN
4026
SOUTH AFRICA
Technical data
This product conforms to the
European directives 2004/108/
EC, 2006/95/EC, 2009/125/EC
and 2011/65/EU.
Power supply:
220-240 V~, 50/60 Hz
Power consumption:
2200 W
Isolation class:
1
Shock steam amount:
90 g/min
Technical and design modifications
reserved.
5
Although the iron is plugged in, base (3)
does not heat up.
x
The
appliance
may
be
improperly
connected. >>> Check the plug and power
cable (1) of the iron.
x
The temperature setting button (2) may be
at the Min. position. >>> Turn the
temperature setting button (2) up to the
steam sign.
Iron does not generate steam.
x
Water reservoir may not contain a
sufficient amount of water. >>> Fill the
water reservoir with water up to Max level.
x
The steam adjustment button (6) may be
at the “0” position. >>> Turn the steam
adjustment knob to the steam position.
>>> Iron base (3) may not be hot enough.
"Anti-Drip" system which prevents water
dripping may be active. Turn the iron
temperature setting button (2) up to the
steam sign. Seat the iron in a vertical
position and wait for the base to heat up.
Shock Steam – Vertical Steam does not
function.
x
These functions may have been used too
frequently in a very short period of time.
>>> Keep ironing at a horizontal position
and wait for a while before using the shock
steam function again. >>> Iron base may
not be hot enough. Turn the iron
temperature setting button up to the steam
sign. Seat the iron in a vertical position
and wait for the base to heat up.
Water drops fall down onto the fabric
during ironing.
x
You may not have fully closed the water
refill lid (5). >>> Close the water refill lid
completely.
Sediments and particles drop off from the
base during ironing.
x
If the water you use for your iron is too
limy, such sediments may form. >>> Use
the self-clean function once and repeat if
necessary. In your next ironing session,
add soft water into your appliance.
The appliance drops water after it cools
down or is stored.
x
You may have left the iron in a horizontal
position while there is water in its
reservoir. >>> Empty the water reservoir.
Stains on the ironing base.
x
Wet garments might have been ironed and
the iron base (3) has lime stains. >>> After
the appliance cools down to a satisfactory
level, wipe the iron base (3) with a
microfiber knitted or cotton cloth soaked in
vinegar.
