PAGE
6
OF 12
The controls
The plate controls for hobs without a control panel are located on the oven fascia
SWITCH THE PLATE ON FOR A
SHORT PERIOD TO DRY
TO CLEAN THE PLATE - WIPE IT WITH A DAMP
CLOTH OR NYLON SCOURING PAD
DO NOT USE ONE POT ON TWO PLATES
USE POTS THAT ARE SLIGHTLY
BIGGER THAN THE PLATE
AND THAT HAVE A SMOOTH FLAT BASE
DO NOT USE A POT WITH AN UNEVEN BASE
BEFORE USING THE PLATES FOR THE FIRST TIME
SWITCH THEM ON FOR FOUR MINUTES
AT THE HIGHEST SETTING
THIS ALLOWS THE PROTECTIVE COATING
TO BURN IN
TO INHIBIT CORROSION, PERIODICALLY APPLY
SALT-FREE VEGETABLE OIL,
SEWING MACHINE OIL OR
ELECTRICAL HOT-PLATE POLISH,
(AVAILABLE FROM DEFY SERVICE CENTRES)
DO NOT USE A POT WITH A DIRTY OR WET BASE
DO NOT USE A POT ON AN UNMATCHED PLATE
TO CONSERVE ENERGYAND AVOID SPILLS
WE RECOMMEND
YOU KEEP A LID ON THE POT.
Plate controls
1.
Left front
2.
Left back
3.
Right back
4.
Right front
Ringer timer on Gemini hobs with a control panel only
x
The ringer timer may be used for timing a cooking period of up to 60 minutes.
x
First wind the timer by turning the knob fully clockwise.
x
Return the knob to the desired time period.
x
At the end of the this period the bell will ring.
x
Note: If the timer is not first fully wound the bell may not ring.
1 2 3 4
DO DO NOT
Solid plate - care guide
