33
Using Cooker Section
Using Gas Burners
Flame cut-off safety device (FFD) *;
operates instantly
when safety mechanism activates due to overflown
liquid over upper hobs.
1.
The valves controlling the gas cookers have special security
mechanism. In order to light the cooker always press on the switch forward
and bring it to flame symbol by turnin counterclockwise. All of the lighters
shall operate and the cooker you controlled shall light only. Keep the
switch pressed until ignition i performed. Press on the lighter button and
turn the knob counter clockwise.
2.
Do not continuously operate the igniter for more than 15 seconds. If
the burner does not ignite, wait minimum one minute before try again.
3. In models with gas security system, when flame of the cooker is
extinguished, control valve cuts off the gas automatically. For operate
the burners with gas security system you must press the knob and turn
counter-clock-wise. After the ignition you must wait nearly 5-10 second
for gas security systems activation. If the burner is extinguished for of the
any reason, close the gas control valve and wait a minimum of one minute
before trying again.
4.
Closed
Fully open Half open
5.
Before operating your hob please make sure that the burner caps are well
positioned. The right placement of the burner caps are shown as below.
FFD
Figure 14
Figure 15
