Page 20
UPPER SPRAY ARM
Check if the holes on the upper spray arm (2)
are clogged. If they are clogged, remove and
clean the spray arm. Turn its nut to the left to
remove the upper spray arm (C, D). Make
sure that the nut is well tightened when
refitting the upper spray arm.
CEILING SPRAY ARM
Check if the holes on the top ceiling spray
arm (3) of your machine are clogged. If they
are clogged, remove and clean the spray
arm. To remove the spray arm (E), push it
upwards slightly and then turn clockwise (F).
To refit the spray arm, seat it into its slot,
push
slightly
upwards
and
turn
it
anticlockwise until it is securely fitted. After
the spray arm has been refitted, ensure that
it rotates without any obstruction.
MACHINE DOES NOT START
•
Power cable is unplugged. >>>
Check if
the power cable plug is securely plugged
in.
•
Fuse is blown. >>>
Check the fuses in
your house or for a tripped circuit breaker.
•
Test the wall socket for power using
another appliance.
•
Inspect the electrical cord for damage.
•
Eliminate the use of an extension cord, if
any is being used.
•
Water is cut off. >>>
Make sure that the
water inlet tap is open.
•
Door of the dishwasher is open. >>>
Make
sure that you have closed the door of the
dishwasher.
•
On / Off button is not pressed. >>>
Make
sure that you have turned the dishwasher
on by pressing the On / Off button.
DISHES NOT CLEANED PROPERLY
•
Load dishes as prescribed.
•
Choose a longer programme that washes
at a higher temperature.
•
Ensure spray arms are clean and rotate
freely.
•
Clean filters as prescribed.
•
Do not overload baskets.
•
Adjust the amount of detergent.
•
We recommend you use tablet detergents
as these are less affected by humidity
during storage.
•
Adjust the amount of rinse aid.
•
Ensure that the lid of the detergent
dispenser is closed properly.
DISHES NOT DRIED PROPERLY
•
Load dishes as prescribed.
•
Adjust the amount of rinse aid.
•
Choose a longer programme that washes
at a higher temperature.
•
Leave the dishwasher door slightly ajar at
the end of the programme and allow the
dishes to cool for at least 15 minutes
before unloading.
•
Start unloading from the lower basket.
Trouble shooting
17
