background image

The machine does not drain or spin. 
Check:  

• 

That the drain hose is not kinked or obstructed. 

• 

That the outlet pipe or sink is not blocked. 

 

The machine does not fill with water. 
Check:  

• 

That the water tap is open. 

• 

That the drain hose end is at least 500 mm. above floor level. 

• 

That the inlet hose is not kinked.  

• 

That there is a water supply to the tap. 

 

The machine vibrates or is excessively noisy. 
Check:  

• 

Whether anything has fallen between the wall and the machine. 

• 

That the machine stands level and that the feet are locked. 

• 

That the transport brackets and all packaging has been removed. 

• 

That there is a clearance of at least 50 mm. Between the back of the machine and the 
wall. 

• 

That the laundry is evenly distributed in the drum. 

• 

That the wash load is balanced. (not one heavy item off to one side.) 

 

The door will not open 
Check:  

• 

That two minutes have elapsed since switching off to allow the safety lock to 
disengage. 

 

The machine leaks water 
Check:  

• 

If the machine is not levelled, it is likely that some water will escape from the 
detergent dispenser during filling. To rectify, level the machine from front to back. 

• 

That the inlet and outlet hoses are secured.

 

 
 
 
 

The Manufacturer strives for continuous improvements. For this reason, the text and 

illustrations in this book are subject to change without notice. 

 

Part Number 062125 

 

Содержание AUTOMAID














Отзывы: