![background image](http://html1.mh-extra.com/html/definox/sorio/sorio_maintenance-notice_2464267030.webp)
MAINTENANCE NOTICE
NM-275
index 09
Page 30/50
September 2021
8.5
Changing tolerances
1) Go to the
Tolerance
menu by pressing 3 times the button
2) When the
Tolerance
LED is flashing, confirm by pressing the button
for at least 3 seconds.
3) The current tolerance is displayed on the front LED. Press the button
several times to change the tolerance
until the desired one is found.
Button
Effect
LED column
RGB
LED
Change the tolerance to ±
1 mm
M
Flash
T
steady
off
Change the tolerance to ±
1.6 mm
A
Flash
T
steady
off
Change the tolerance to ±
2.5 mm
S
Flash
T
steady
off
Change the tolerance to ±
5 mm
S Flash
A
Flash
M
Flash
T
steady
off
Change the tolerance to ±
10 mm
S Flash
A
Flash
T
steady
off
3 x
3 sec.