Unpacking Your Mythos Loudspeakers
Base Installation Instructions
Please Inspect For Shipping Damage
Each loudspeaker leaves our plant in perfect condition. Any visible or
concealed damage most likely occurred in handling after it left our plant
and should be reported at once to your Definitive dealer or the delivery
company that delivered your loudspeaker. Please unpack your system
carefully. Save all cartons and packing materials in case you move or
need to ship your system. Record the serial number found on the back of
the Mythos loudspeakers in the appropriate place on your warranty card.
Tools required:
4mm (or 5/32") Allen Wrench
(also called Hex Key driver) (supplied)
Parts required:
Tempered Glass Base (supplied), four Allen head bolts
(supplied), four plastic washers (supplied)
Instructions:
1. Carefully lay the Mythos on its side. Lift the base of the speaker about
six inches and support it with a soft padded object, such as a pillow.
Do NOT support the speaker with a hard object, as you might dent or
scratch the aluminum finish.
2. Place one plastic washer on each bolt.
3. Insert the bolts into the glass base from the same side that the silver
feet are attached to.
4. Finger tighten all four bolts into the threaded hole on the bottom of
the Mythos. If this has been done correctly, washers will be located
between the glass base and the heads of the bolts.
5. GENTLY tighten each bolt with the Allen head wrench. Do NOT
overtighten or you may crack the glass.
6. Note the label showing the height adjustment ring and locking collar
on the silver feet. Carefully return the speaker to the upright position
and adjust the feet to level the speaker.
2
