7
HOMEDEPOT.COM
Please contact 1-866-308-3976 for further assistance.
Installation (continued)
7
Caulking around the light
fixture
Ƒ
Caulk around the 1-2- asy Connect™ (D) and
mounting surface with silicone sealant (not
included).
Operation
1
Adjusting the lamp heads
WARNING:
Risk of fire. Keep the lamp heads at least
2 in. (51 mm) from combustible materials.
CAUTION:
Keep lamp heads 30° below horizontal to
avoid water damage and electrical shock.
Ƒ
Turn the power on at the circuit breaker or fuse
and turn on the wall switch.
Ƒ
If needed, gently grasp the lamp heads (A)
and tilt them up or down to adjust the light
coverage area.
NOTE:
The lamp heads are designed to rotate up and
down only. Do not attempt to rotate any other direction.
2
Rotating the sensor controls
downward
CAUTION:
To avoid water damage and risk of electrical
shock, the motion sensor controls must be facing the
ground when installation is complete.
Ƒ
Rotate the motion sensor (C) so the controls
face toward the ground.
NOTICE:
All clearances must be maintained. See
Safety Information
on page 2.
1 MIN
5 MIN
TEST 20
MIN
L M
H
OFF 3H
DUSK T
O
D
A
WN
6H
ON TIME
SENS
.
DU
AL BRITE
D
C
A
