(Ex. You can NOT connect 2 turbo2.0 gauges together.)
5. Return the slide switch to
U
or
M
.
7 -6-2. Set the warning buzzer ON/OFF
By sliding the dip switch1 of the control unit, the warning buzzer sound is
turned ON/OFF. The switch operation sound cannot be canceled.
Please set while the ignition is off.
The setting of warning buzzer for ZD is controlled by ZD. Refer to ZD
manual.
7 -6-3. Change the illumination color
Illumination color for CR/RS gauges can be selected from 2 colors. Illumina-
tion color of BF/A1 and ZD can not be changed.
1. Set the slide switch to
L
.
2. If the
L
button is pressed, the gauge shifts to Setup mode.
3. Select the gauge by pressing
L
button.
4. When the
M
button and the
R
button are pressed at the
same time, the illumination color changes.
CR white dial: blue ⇔ amber red
CR black dial: white ⇔ amber red
RS black dial: classic green ⇔ classic white
In case that CR/RS gauges and ZDs are installed together and the dimmer set-
ting is AUTO, the illumination of CR/RS gauges turned ON/OFF automatically
regardless ON/OFF of the illumination switch of vehicle. If the setting is done
in bright light, the illumination of CR/RS gauges may be unlighted. Please
place a hand over the dim sensor of ZD or move vehicle to a dark place.
5. Return the slide switch to
U
or
M
.
7 -6-4. Offset adjustment of Turbo (2.0 and 1.2) and In-Mani Press
The needle pointer of turbo should indicate 0kPa when the ignition is on. But
69
