)BSEEJTLJOTUBMMBUJPO
4UFQ6OTDSFXUIFTDSFXTBOESFNPWFVQQFSDPWFS
4UFQ$POOFDUPOFFOEPGUIFIBSEEJTLQPXFSDBCMFBOEEBUB
DBCMFUPUIFNPUIFSCPBSEBOEUIFPUIFSFOEUPUIFIBSEEJTL
4UFQ 1VU 973 PO JUT TJEF "MJHO UIF TDSFX UISFBE XJUIQSFTFSWFE
IPMFTPOUIFDIBTTJTCBDLQMBOFBOEUIFOGJYUIFTDSFXT
4UFQ*OTUBMMUIFVQQFSDPWFSBOEGJYJUCZTDSFXT
Installation Diagram:
Please use the XVR dedicated SATA
hard disk recommended by the device
manufacturer. Make sure the power is
off before installation.
If there is a hard disk rack, first remove
the hard disk rack, install the hard disk
on the hard disk rack, connect the hard
disk power cord and data line, and then
install the hard disk rack on the host.
Cautions
3. Connection indication
Power on
Power on
IP Camera
Cable
Cable
Switch
XVR
VGA
cable
Monitor
Mouse
Cable
*OUFSGBDF%FTDSJQUJPO
Icon
Name
DC Power Input
AC Power Input
Power switch
VGA
HDMI
Ethernet
USB
Audio Input
A-IN
A-OUT
Alarm-IN
Alarm-OUT
RS485
RS232
Audio Output
Alarm In
Alarm Out
RS485
RS232
BNC
Only when all the lines are
connected can the power supply
be connected.
Cautions
Power on
Camera
-PDBM#BTJD0QFSBUJPO
#PPU6Q
.BLFTVSFUIFJOQVUWPMUBHFNBUDIFTUIF973DPOTVNQUJPO$POOFDUUIF
EFWJDFUPUIFNPOJUPSBOEUPUIFQPXFSBEBQUFS JGBWBJMBCMF1MVHJOUIF
QPXFSTXJUDIPOUIFQPXFSCVUUPO JGBWBJMBCMFUIFOUIFEFWJDFCPPUVQ
/05&
1.
It is recommended that you refer to international standards
for power supply input with stable voltage values and low
ripple interference.
2.
You should reset the device administrator password (the
system default username is "admin" and the password is
"12345") when booting for the first time. To ensure the
security of the device, please save the admin login password
and modify it regularly.
.PEJGZ1BTTXPSE
Step 1: After the device is powered on, select the
system language, click "Apply", enter the password, click
"Login", click "Modify".
Step 2: Enter the new password and confirm password,
tick off the "Unlock Pattem" to draw twice the consistent
unlock pattern consisting of 4-9 points.
