DeFelsko POSITECTOR RTR, Быстрое руководство, Страница: 10 / 60

Selects the type of batteries used in the Gage from a choice of
“Alkaline”,“Lithium”or“NiMH” (Nickel-metal hydride rechargeable).
If NiMH is selected, the Gage will trickle charge the batteries while
connected via USB to a PC or optional AC charger. The battery
state indicator icon is calibrated for the selected battery type. No
damage will occur if the wrong battery type is selected. DeFelsko
recommends the use of eneloop (NiMH) rechargeable batteries.
Battery Type
A statistical summary will appear on the
display. Remove the last measurement by pressing the (–) button.
Press (+) to clear statistics.
Statistics
σ Standard Deviation
Minimum Value
Average
Maximum Value
x
8
Reset
Reset (menu reset) restores factory settings and returns the Gage
to a known condition. The following occurs:
- All batches and stored datasets, batch names and screen
captures are erased.
- Menu settings are returned to the following:
Memory = OFF
Statistics = OFF
Memory Display = None
Bluetooth = OFF
WiFi = OFF
Date, Time and WiFi are not affected by either Reset .
Units = microns
Flip Display = Normal
Sound = ON
Language = English
Battery Type = Alkaline
Backlight = Normal
USB Drive = ON
Auto Sync = OFF
Setup Menu
Tape Grade = XC
Linearize = ON
NOTE:
Perform a more thorough Hard Reset as follows:
1 Power down the Gage and wait 5 seconds.
2 Simultaneously press and hold the (+) and center
buttons until the Reset symbol appears.
This returns the Gage to a known, “out-of-the-box” condition.
It performs the same function as a menu Reset with the addition of:
- Bluetooth Pairing info is cleared.
- Alarm settings are set to defaults.
- Menu settings are returned to the following: