10
The above
WiFi
,
USB
and
Bluetooth
menus contain a
Sync .net
Now
option. When selected, the Gage immediately synchronizes
stored measurement data via its respective communication
method (internet connection required). Alternatively, select
Auto
Sync .net
from within the
USB
connect menu to automatically
synchroniz e upon connection to a PC. Additional measurements
added to memory while connected are synchronized only when the
USB cable is disconnected and reconnected, or when the
Sync
.net Now
option is selected.
WiFi
connected gages automatically
attempt synchronization upon power-up.
Bluetooth
(Advanced models only)
PosiSoft Desktop
is required when using a
USB
connection to synchronize measurements with PosiSoft.net.
NOTE:
Allows communication with a smart device running the
PosiTector App (pg. 9) via auto-pairing
Bluetooth Smart
(BLE)
wireless technology.
Bluetooth Smart
(Advanced models only)
Sync Batches
Select batches to flag them for synchronization to the PosiTector
App.
Sync Batches
is useful when connecting a new device to a
gage with pre-existing batches, since only batches created while
Bluetooth Smart
is enabled are automatically selected.
Selected batches are synchronized when the next reading is
taken in a batch flagged for synchronization, or when the
Sync
Batches
option is selected at the bottom of the list of selected
batches.
If
Bluetooth Smart
is disabled or disconnected, data
from batches selected in the
Sync Batches
menu are held in a
queue until communication with the PosiTector App is re-
established.
NOTE:
www.
GlobalTestSupply
.com
Find Quality Products Online at: