Page 3
Auto Log
The PosiTector DPM can automatically record data into memory at user selected time
intervals. When selected, the Auto Log icon will appear on the display.
Auto Log continues recording until the instrument loses power or the user turns off Auto
Log mode. Stored datasets will remain in memory until full, then the oldest dataset or
batch will be overwritten to allow space for the next dataset.
The screen turns off between measurement intervals while in Auto Log mode. The
Gage will store datasets for 50-60 hours on a set of fresh alkaline batteries depending
on the interval of the measurements.
The PosiTector DPM is ideal for remotely monitoring environmental parameters over
time on the jobsite, paint shop or manufacturing floor.
NOTES:
It is recommended that fresh alkaline batteries be installed prior to an extended Auto
Log if not connected to continuous USB power. Connect the Gage to a USB power
source for long-term use using the included USB C cable.
