DEFEAT-19.Cleaning
UNIT ASSEMBLY
Unpack and remove the PSF-B201 from the
shipping boxes, noting that the Application Hose
Collar is loose and being careful to avoid pulling on
the clear plastic tubes or and black wiring conduit
that run inside of the Application Hose, from the
Power Switch and Discharge Nozzle and into the
Motor Housing.
Carefully reattach the Application Hose by screwing
its Collar to the Motor Housing, while ensuring that
the two clear plastic tubes and the black wiring
conduit remain inside the Application Hose
STEP -1
STEP -2
IMPORTANT NOTE:
The black wiring conduit runs from the Motor Housing,
through the Application Hose and to the Power Switch on the Application
Hose Handle. One of the two clear plastic tubes runs from the Motor
Housing, through the Application Hose and to the Discharge Nozzle. Note
that the second of the two clear plastic tubes is merely a vent tube. It runs
from the Motor Housing and is cut to extend about 6”
-
8” from it. This cut
end is loose, meaning it connects to nothing, however it must also run into
the Application Hose. See below photo for proper placement.
