DEFA REDARC SmartCharge 10A, Руководство пользователя

Страница: 2 / 16

2
Product warnings
Save these instructions - this manual contains important
safety instructions.
Do not operate the battery charger unless you have read and
understood this manual and the charger is setup as per these
installation instructions.
1. Risk of explosive gases: Working in the vicinity of a
Lead-Acid battery is dangerous. Batteries generate
explosive gases during normal operation. For this reason,
it is of utmost importance that you follow the instructions
when installing and using the charger.
2. The Battery Charger should not be used by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they are supervised or have been instructed on
how to use the appliance by a person responsible for their
safety. Children should be supervised to ensure that they
do not play with the Battery Charger.
3. Do NOT alter or disassemble the Battery Charger under
any circumstances. All faulty units must be returned
to REDARC for assessment. Incorrect handling or
reassembly may result in a risk of electric shock or
fi re and may void the unit warranty. The mains’ power
supply cord cannot be replaced. If the cord is damaged,
discontinue usage.
4. This charger is designed for use only with LEAD/ACID type
(both open and closed) batteries including AGM, GEL and
Lead Crystal types or LiFePO
4
batteries with appropriate
cell & battery protection; and for battery sizes as shown
on page 8. The charger should not be used for other
battery types or for charging non-rechargable batteries.
5. Check the manufacturer’s data for your battery and
ensure that the ‘Maximum’ voltage of the profi le
you select does not exceed the manufacturer’s
recommended maximum charging voltage.
6. Check the manufacturer’s data for your battery and
ensure that the ‘Continuous Current Rating’ of the charger