DEFA GPS LINK, Руководство по установке

Страница: 7 / 28

English 7 www.defa.com
• The GPS LED on Link Hub (see. fig.3.) turns on when the
GPS module has contact with the satellites and will turn off
30 minutes after that.
• The LED on the GPS module will turn on when the
GPS module is activated and blinks when in contact
with the satellites.
• Ensure that the LEDs on Link Hub are lit/blinking as they
should before the vehicle is reassembled.
• Upgrade customer subscription via
DEFA Link installer account.
IMPORTANT! Before delivery to customer:
Ensure that the system is tested and the customer
informed on how to use the system.
• PWR connector, pin 1, RED (red wire):
+ 12V. Connect to b pole (5A fuse).
• PWR connector, pin 2, BLK (black wire):
Earth. -12V. Connect to battery – pole.
•
PWR connector, pin 3, BLU (blue wire).
Ignition. Connect to vehicles ignition signal (terminal 15).
Connection of the blue wire is optional. Insulate the wire
end if not connected.
TECHNICAL DATA
Operating Temperature: - 40 - 85°C
Dimensions: 38 x 44 x 19 mm
Water resistance: IP 67