DZ 95053 – Half Ladder Rack
INSTALLATION INSTRUCTION MANUAL
Please read this manual carefully before installing the ladder rack.
This manual contains important safety and maintenance instructions.
WARNING—Failure to follow or comply with all warning & instruction in this manual may result in equipment damage, or
serious bodily injury.
WARNING—Our ladder rack is only intended, and only safe for transporting ladder, lumber, pipes and other similar materials.
It is the user’s responsibility to ensure that the materials being transported is safely secured on the rack before transportation.
Any use of this product for other purposes, or modifications made to this product can cause serious bodily injury or property
damage.
CAUTION—To prevent resonant vibration damage during driving with unloaded racks, the leg assembly should be removed.
TOOL REQUIRED
z
Electric drill w/1/2” & 7/32” drill bits
z
Screwdriver-straight
z
Framing square
z
Center punch
z
Hacksaw
z
Ruler
z
Tape
WARNING- Prior to drilling, check under vehicle for proper locations to avoid puncture, but or damage fuel tank, fuel lines,
brake lines, electric wires, etc.
WARNING- Always wear protective eyewear to keep debris out of your eyes when checking underside of the vehicle, and when
drilling.
Hardware Kit
BOLT
Nylon Locking
Nut
Flat Washer
Lock
Washer
TYPE
SIZE
QTY
QTY SIZE
QTY QTY
A
Carriage Bolt
M10
×
80 1
1
Ø25 1
0
B Hex
Bolt
M8
×
30 9 0
Ø25 9
9
D
Carriage Bolt
M10
×
20 2
0
-
0
0
E Blind
Fastenner
9
-
-
-
F Installation
Bolts
& Tool
M8
×
55 1set -
-
-
-
