USE INSTRUCTIONS
1. Make sure the vacuum cleaner is turned off and unplugged during assembly. Once the vacuum cleaner
is assembled, make sure the HEPA filter is in place.
2. Plug the power cord into a power outlet.
3. Slide the ON switch, on the front of the main body near the top to turn the vacuum on
4. Slide the OFF switch to turn the vacuum OFF.
5. Unplug the power cord after each use.
CLEANING AND MAINTENANCE
MAINTENANCE
CAUTION: Always be sure that the vacuum is turned OFF and UNPLUGGED before cleaning or attempting to
store the item. NEVER IMMERSE THE MOTOR in water or any other liquid. NEVER operate the vacuum
without the dust collection container and HEPA filter in place.
Never leave the appliance unattended it can automatically restart.Even when the appliance stops working
due to overheating, make sure that the appliance is off and disconnected from the power source. Wait until
the appliance cools down completely then connect to the power source again. If the appliance does not
work anymore, please return it to the nearest authorized service facility for repair.
HOW TO CLEAN THE DUST COLLECTION CONTAINER
1. Press the dust collection containerrelease button to remove the dust collection container.
2. Remove the HEPA filter and empty the dirt in the dust collection container into a trash receptacle.
3. Shake the HEPA filter over the trash receptacle to remove dirt in the filter.
4. Replace the HEPA filter into the dust collection container and replace the dust collection container
securely onto the main body.
HOW TO CLEAN THE VACUUM CLEANER
1. Use a damp soft cloth to wipe the outside of the main body and handgrip.
2. The dust collection container (without HEPA filter)may be immersed in water to clean. However, do not
use abrasive cleaners or put it in the dishwasher. Allow it to dry completely before re-attaching it to the
main body.
3. Shake the HEPA filter over the trash receptacle to remove dirt in the HEPA filter. If necessary, the HEPA
filter may be rinsed with water. Allow to dry completely before inserting the HEPA filter back into the
dust collection box.
4. Replace the HEPA filter into the dust collection container and replace the dust collection container
securely onto the main body.
HOW TO CLEAR CLOGS
Low suction or poor pick-up may be due to a clog in the vacuum canister.
If you notice a change in the sound of the motor or a reduction in performance, check for clogs. CAUTION:
Always be sure that the vacuum is switched OFF and unplugged before attempting to remove a clog.
1. Empty dust collection container.
2. Check dust collection container for buildup.
3. Check for clog in vacuum head.
4. Check floor tool.
Содержание DX700
Страница 1: ...Vacuum Cleaner MODEL NO DX700 ...
