VISTA X INSTRUCTION MANUAL BY DEEPTECH
3
1.
Assembly
Before assembling your Vista Gold Gain please check that the package includes the following
parts:
•
11” /9” DD waterproof coil (octagon coil) with coil cover
•
Lower shaft
•
Middle shaft with cam-locks
•
Upper shaft
Fully assembled with:
- Control box
- Battery compartment with armrest and detector stand
- Padded hand grip
•
Coil hardware consisting of:
-
Rubber washers (2)
-
Plastic wing nuts (2)
-
Plastic bolt
-
Velcro tabs (1)
•
Eight 1,5V AA Alkaline Batteries
•
USB card with the manual and product videos
•
Limited Warranty Information (in the instruction manual)
If any of the above listed items are missing, please contact us immediately.
1.1.
Connecting the coil to the lower shaft
1)
Place the two rubber washers into the holes on either side of the lower shaft.
2)
Slide the bottom of the lower shaft into the bracket on top of the coil.
3)
Insert the plastic bolt through the hole in the coil and the lower shaft.
4)
Fasten the bolt with the plastic wing nut. Be careful not to damage the thread
of the bolt by over-tightening. The plastic wing nut may need to be loosened
to adjust the coil.
