. Small objects like bottle caps, pull tabs, pieces of aluminum are rejected
. The device can be operated effectively in highly mineralized soil areas,
beaches, fresh and salt waters.
. High quality components are used and all critical parts of the circuit are
designed to align themselves to signal drift due to changing temperatures
. The hot rocks are categorically ignored
. MegapulseIII is a professional deep treasure-hunting instrument with its
incredible depth detecting capabilities.
. The unique automatic motion mode of operations makes it user-friendly
even for the beginners
Quick Start Guide:
1. Make sure battery is fully charged.
2. Attach the battery to the carrying case.
3. Plug in battery to back of unit.
4. Connect the coil to the shaft.
5. Connect the coil to the back of the unit.
6. Set the “Interference” knob to the middle position.
7. Turn all other knobs to the left (counterclockwise).
8. Set your Mode (Auto/Semiauto).
9. Turn on unit and set the Sensitivity Knob to the black dot.
10. Slowly turn the Delay knob to the right (clockwise) until the unit is not
making any more noise.
11. Slowly turn the Threshold knob to the right until you are just hearing one to
two ticks per second.
12.Move in a forward, left, or right direction keeping the coil level.
Do not push the reset button over metal targets. This will clear them from being
seen again.
After re-adjusting the delay or sensitivity you may have to push the Reset button
more than once in order for it to correct against the background.
FIELD GUIDE
1.Assemble the search coil and connect its plug to the jack on the rear panel of
the control box. Lift the coil at the operational height (3-6 inches) over a place
free of any metals.
- 4 -
