Commissioning
057-300 ISSUE: 1.1
Page 22 of 36
4.1.2 INSTRUMENTATION
NOTE: This section documents the Factory (Default) settings of the DSEE050. Due to the
configurable nature of the device this is subject to change as required by the supplier. Contact
supplier or consult the device configuration source for full details of the configured
instrumentation.
Instrumentation falls into three categories as detailed below. Press
to cycle the display
between them.
•
Engine and analogue input instrumentation.
•
Diagnostic Trouble Codes (DTCs).
•
Display brightness setting.
•
Device information.
4.1.2.1
ENGINE AND ANALOGUE INPUT INSTRUMENTATION
NOTE: This section documents the Factory (Default) settings of the DSEE050. Due to the
configurable nature of the device this is subject to change as required by the supplier. Contact
supplier or consult the device configuration source for full details of the configured
instrumentation.
Sentinel Values
Out of Range
instruments or instruments in an
Error
condition display the following:
Display
Description
- - - -
Under Range. The value is under the minimum value allowed for the
instrument.
+ + + +
Over Range. The value is over the maximum value allowed for the
instrument.
XXXX
Unimplemented. No data is available for this instrument. This occurs if the
instrument is not transmitted by the CAN ECU or the input assigned to the
instrument is not configured.
# # # #
Bad Data or CAN connection is not available. This occurs upon no data
being received from the CAN ECU in situations such as
Engine not
Running
or an error with the CAN connection.
Page 1 - Summary
Page Display
Description
Engine Speed
Engine Oil Pressure
Engine Coolant Temperature
Battery Voltage of the ECU
Engine Total Running Hours
