ACCESSING THE FRONT PANEL CONFIGURATION EDITOR
CONFIGURATION
ENTER PIN
****
•
Press the Stop/Reset
and Info
buttons
simultaneously
•
If a module security PIN has been set, the PIN number
request is then shown (The first * is flashing) :
•
Press
+
or
–
buttons to adjust it to the correct value. Press
9
when the first digit is correctly entered.
Repeat this process for the other digits of the PIN number.
•
When
9
is pressed after editing the final PIN digit, the PIN is checked for validity. If the number is not
correct, the editor is automatically exited. To retry you must re-enter the editor as described above.
CONFIGURATION
Oil pressure pre-alarm
•
If the PIN has been successfully entered (or the module PIN
has not been enabled) the first configurable parameter is
displayed :
EDITING A PARAMETER
2bar 30PSI 200kPa
•
Enter the editor as described above.
CONFIGURATION
Oil pressure pre-alarm
2bar 30PSI 200kPa
•
Press
the
+
and
–
buttons to cycle to the parameter you wish
to change.
•
Press
the
9
button to enter edit mode. When in edit mode
(indicated by the flashing parameter) pressing the
+
and
–
buttons will adjust the parameter to the desired value.
•
For
date and time editing only: press
to select between day, month, year, hours and minutes.
•
Press
the
9
button to ‘save’ the value. The value will stop flashing to confirm that it has been saved.
•
To select another value to edit, press the
+
button. Continuing to press the
+
and
–
buttons will cycle
through the adjustable parameters as shown overleaf.
•
To exit the front panel configuration editor at any time, press the Stop/Reset
button. Ensure you
have saved any changes you have made by pressing the
9
button first.
NOTE:- When the editor is visible, it is automatically exited after 5 minutes of inactivity to
ensure security.
NOTE:- The PIN number is automatically reset when the editor is exited (manually or
automatically) to ensure security.
NOTE:- More comprehensive module configuration is possible using the 5xxx series PC
configuration software in conjunction with the P810 PC interface. Please contact us for further
details.
D E E P S E A E L E C T R O N I C S
5 3 2 0 I N S T A L L A T I O N I N S T R U C T I O N S
053-014
ISSUE4
Deep Sea Electronics Plc.
Highfield House, Hunmanby Industrial Estate,
North Yorkshire. YO14 0PH.
ENGLAND
Tel:+44 (0)1723 890099.
Fax: +44 (0)1723 893303.
LO CALL (from UK BT landlines) :
Telephone 0845 260 8900. Fax 0845 260 8901
Email: [email protected]
Web: www.deepseaplc.com
Deep Sea Electronics inc.
3230 Williams Avenue
Rockford, Illinois 61101-2668,
U.S.A.
Phone: +1 (815) 316-8706.
Fax: +1 (815) 316- 8708
TOLL FREE (USA only) : Tel: 1 866 636 9703
Email: [email protected]
Web: www.deepseausa.com
DIMENSIONS
:
240mm x 172mm x 57mm
(9.5” x 6.8” x 2.25”)
PANEL CUTOUT
: 220mm x 160mm
(8.7” x 6.3”)
TYPICAL WIRING DIAGRAM
