Deenkee I7, Руководство пользователя

Страница: 15 / 22

One way as below.
A.Turn on the cleaner entering standby mode with red light.
B.Press the" "button for 6s till orange light blinks,meanwhile,press" "button,
do not release both buttons till beep sounds heard.
Beep sounds mean paired.
Another way as below.
In off mode,press " " and " "at the same time for 3s,it is well paired when beep sounds heard .
Remarks:
If no beep sounds heard during above operations,it means failure of pairing.Pls repeat the above
methods.
Note:
If the remote control fails to respond, please check whether it’s it's in low
battery. If it is still not work after charge,then re-pair again in below methods.
CLEAN
CLEAN
Tips:
Water Tank is a product add-on. It is only suitable for work on flat floor. Please select
it according to the use environment.
4.4 Water Tank's Usage
Please install the Water Tank as shown in the figure above.
Step:
1. As shown in the picture, open the cover of the water tank and fill it with water.
2.The buckle position should be aligned on the machine when installing the water tank
components.
3.When the water tank is held perpendicular to the vacuum cleaner, please press down
gently, you hear "click", and water tank close to the bottom of the machine, installation
completes.
- 14 -