Cut and apply gasket [P] to the end piece over the 3 slots.
The gasket should run from corner to corner. Repeat for other end.
Peel the plastic from the end pieces [D]. Place
the end piece in the box as shown and
Loosely attach the end piece with a
#10 button head bolt [J], #10 washer [F],
#10 lock washer [G], and #10 nut [H].
Only attach the end piece at the top on
both the front and back.
Repeat this step for the other end piece.
3
4
SLOTS
ATTACH TOP ON
FRONT ALSO
PS TB BOLT TOGETHER
3 OF 9
