IM-Inst-RF160en v0.4
Dedrone
11
Installation
5
Take out the pole mount.
6
Put the pole mount on the pole.
•
To open up the pole mount unscrew the
pole fixing screws.
7
Adjust the pole mount in the desired directi-
on and tighten the pole fixing screws approp-
riately. Only use the supplied screws.
8
Center the pole mount plate over the pole
and tighten the aligning screws appropria-
tely. Only use the supplied screws.
9
If fall protection according to the installati-
on regulations is required screw down the
supplied fall protection ring and connect your
suitable fall protection to the ring.
The fall protection must be dimensioned
according to installation height in terms of
thickness and length.
