NuProg-E2 User Manual
www.dediprog.com 4
A. Power Signal Light
The light indicates the programmer is powered on.
B. Operation Lights
Red LED
(Error): Error; programming has failed.
Yellow LED
(Busy): The programmer is operating.
Green LED
(Pass): Passed; the programming has completed successfully.
C. Alignment Pin
For
socket adaptor installation
D. Reset Button
Only for repair use
E. Programming Socket Sites
Built-in high speed connector, which is for installing socket adaptor.
F. USB 3.0 Port
For connecting programmer with the computer.
G. Power Connector
External power inputs
(In order to make it more stable, please make sure the power adapter is
connected, and it is recommended to connect the power first, and then plug in USB cable.)
F. USB 3.0 Port
G. Power
Connector
