manualshive.com logo in svg

DeDietrich NeOvo EcoNox EFU 22, Руководство пользователя, Страница: 32 / 52

Поделиться
Скачать
DeDietrich NeOvo EcoNox EFU 22 Скачать руководство пользователя страница 32

For more information, see

Browsing in the menus, page 19

User menu, page 27

8.2.3  Setting the domestic hot water temperature

Note

The name of the PCB is displayed. Check that it is actually the 

PCB on which the setting must be made.

1. Access the domestic hot water production parameters by pressing 

the 

key twice. 

2. Display the domestic hot water production circuit parameters by 

pressing the 

key. 

The name of the circuit and the domestic hot water temperature set 

point are displayed alternately.

3. Access setting of the domestic hot water temperature set point by 

pressing the 

key.

4. Set the domestic hot water temperature set point by pressing   or 

key.

5. Confirm the new temperature set point by pressing the 

key. 

Note

Press the 

h

 key to cancel all input.

For more information, see

Browsing in the menus, page 19

User menu, page 27

8.2.4  Activating Manual Forcing

Note

The name of the PCB is displayed. Check that it is actually the 

PCB on which the setting must be made.

1. Access the menus by pressing the two keys on the right simultane­

ously. 

Fig.42 Accessing the domestic hot water 

production parameters

MW-6000254-1

Fig.43 Confirmation of the domestic hot wa­

ter circuit

MW-3000271-2

Fig.44 Accessing the menus

MW-5000009-3

8  Control panel settings IniControl 2

32

EFU

7615193 - v01 - 09072015

Содержание NeOvo EcoNox EFU 22





















































Отзывы:

Нет отзывов