DeDietrich NeOvo Condens EFU C 40, Руководство пользователя

Страница: 31 / 48

1. Access the heating parameters by pressing the key.
2. Select the desired circuit, if there are several PCBs, by pressing the
or key.
3. Confirm the selection by pressing the key.
The status of the heating and the associated heating water tem­
perature set point are displayed alternately.
4. Select the mode to be modified by pressing the or key:
ON mode = comfort
ECO mode = reduction
5. Modify the heating water temperature set point for the selected
mode by pressing the or key.
Note
Press the
h
key to cancel all input.
6. Confirm the new temperature set point by pressing the key.
7. Go back to the main display by pressing the
h
key.
For more information, see
Setting the timer programming, page 31
8.2.3 Setting the domestic hot water temperature
Note
Domestic hot water production can be managed via the TIME
PROG sub-menu dedicated to timer programming.
1. Access the domestic hot water production parameters by pressing
the key.
2. Modify the domestic hot water temperature set point by pressing the
or keys.
Note
Press the
h
key to cancel all input.
3. Confirm the new temperature set point by pressing the key.
Go back to the main display by pressing the
h
key.
For more information, see
Setting the timer programming, page 31
8.2.4 Setting the timer programming
1. Access the COUNTERS/TIME PROG / CLOCK menus
Important
The COUNTERS/TIME PROG/CLOCK menus are only accessible
when the icon flashes.
Important
When using a programmable room thermostat, this menu is not
displayed.
Fig.42
MW-5000144-3
Fig.43
MW-3000249-4
Fig.44
MW-6000254-2
Fig.45
MW
-5
0
0
0
0
4
4
-4
8 Control panel settings IniControl 2
7642056 - v06 - 31072017 EFU C 31