3. Keep pressing the key until the code
is displayed.
4. Press the
key to confirm opening the menu.
5. Keep pressing the key until the required device or PCB is dis
played.
6. Press the
key to confirm the selection.
7. Keep pressing the key until
is displayed.
8. Press the
key to open the first factory setting
.
9. Press the or key to modify the value.
See
The data plate for the
value.
10. Press the
key to confirm the value.
11. Press the or key to modify the value.
See
The data plate for the
value.
12. Press the
key to confirm the value.
The factory settings are reset. The display shows various informa
tion and returns to the main display after 3 minutes.
5.5
Chimney sweep mode (forced full load or part load)
1. Press the two keys on the left simultaneously to select chimney
sweep mode.
The device is now running at part load. Wait until
ap
pears on the display.
Fig.80
Step 3
MW-3000313-01
Fig.81
Step 4
MW-3000314-01
Fig.82
Step 5
MW-3000406-02
Fig.83
Step 6
MW-3000407-01
Fig.84
Step 7
MW-3000448-01
Fig.85
Step 6
MW-3000343-01
Fig.86
Step 7
MW-3000344-01
Fig.87
Step 8
MW-3000345-01
Fig.88
Step 9
MW-3000346-01
Fig.89
Step 10
MW-3000347-01
Fig.90
Step 1
MW-3000325-01
5 Installer instructions
7667004 - v.01 - 12072017
19
