DeDietrich GT 400 A, Инструкция по сборке и установке

Страница: 11 / 52

11
21/09/06 - 94863449 - 82294154E GT 400 A
Step one
Front - Rear
GT 408 - GT 410 - GT 412 - GT 414
GT 409 - GT 411 - GT 413
- Fit the 2 rear attachment brackets (in the
body accessories
pack)
and attach them onto the framework using 2 bolts HM 12X25/25 +
4 washers L12 and 2 nuts HM 12.
Use the corresponding holes following the indication on
the frame.
- Put the lower insulation in place (fabric to the top)
packs CS 51 to
CS 57
. Adapt length if necessary or fold the lower insulation after
the casing has been completely assembled.
Step two
Mounting of framework and thermocord
• Locate the framework depending on the direction in which the
burner door will be opened and the length of the burner.
• Put the rear section in position on the framework and support it.
Attach it at the brackets using 2 bolts HM 12x40/40 + 4 washers
L 12 + 2 nuts HM 12.
• Using a silicone gun, put silicone mastic points (1 cartridge
supplied with the accessory pack CS 20) into the sealing
groove of the section (approx. every 5 to 10 cm) then carefully
put the thermocord in place in the sealing groove.
do not pull on the cord when it is being put in, to avoid
stretching to preserve its thickness. Avoid to locate the
junction point at the bottom of the section.
HM 12
40x40
HM 12
L 12
2/5"
8"