DeDietrich ETWH180E, Руководство пользователя

Страница: 117 / 256

6 Settings
6.1 List of parameters
The following parameters can be accessed in all operating modes: ECON­
OMY MODE / HYBRID MODE / OPT.BACKUP
Tab.26 Parameters available in the operating modes
Parameter Description Factory setting
:
Water temperature difference between the set point and the
restart.
Can be set from 3 to 20°C.
5°C
:
Room temperature limit authorised for operation of the heat
pump.
5°C
:
Room temperature operating limit for the electrical back-up.
Can be set from 5 to 18°C
10°C
:
Main timer range duration at Off-peak rate if cabled 8 hours
6.2 Setting the parameters
6.2.1 Selecting the operating mode
1. Unlock the control panel by pressing the CANCEL key for 3 sec­
onds.
The locking indicator goes out.
2. Select the required mode by pressing the MODE key.
3. Confirm the required operating mode by waiting 10 seconds.
6.2.2 Setting the various parameters
The adjustable parameters are as follows, regardless of the selected oper­
ating mode
1. Access the setting parameters by pressing the two keys opposite si­
multaneously.
2. Adjust the value for the parameter by pressing the keys oppo­
site.
3. Adjust the parameter by pressing the keys opposite.
4. Adjust the parameter by pressing the keys opposite.
Fig.91
MODE
MW
-5
0
0
0
4
9
2
-1
Fig.92
MW
-1
0
0
0
7
4
3
-1
Fig.93
MW
-1
0
0
0
7
4
3
-1
Fig.94
MW
-1
0
0
0
7
4
3
-1
6 Settings
en
7659613 - v02 - 08032017 117