20
Maintenance
Important:
Unplug the appliance before carrying out any opera-
tion.
Important
This appliance contains hydrocarbons in the refrigerant cir-
cuit; therefore maintenance and recharging must only be
carried out by personnel authorised by the manufacturer.
Defrosting
Defrosting in the refrigerator compartment occurs automa-
tically. The defrost water is run into a bowl located at the
back of the appliance, above the compressor, where it eva-
porates. Make sure to periodically clean the defrost water
drain hole, using the special “cleaner”.
Cleaning
Clean the inside, removing the shelves and bottle holders,
with lukewarm
water and a mild detergent. Periodically clean the defrost
water drain hole, using the special “cleaner”. Periodically
clean the condenser and motor compressor with a brush
or vacuum cleaner. This operation will improve operation,
with consequent energy saving.During periods when the
appliance is not being used, take the following precautions:
- unplug the appliance;
- defrost and clean the inside and all the accessories;
- leave the door ajar to prevent the formation of unpleasant
odours.
Important:
Never use metal objects to clean the appliance.
Lamp replacement safety instructions
For safety reasons this appliance is provided with special
lamps specifically tested and certified for the foreseen use.
They can only be replaced with lamps
of the same type and having the same
characteristics.
Replacement lamps must be requested only from the ma-
nufacturer or its authorised customer service.
Do not use non-certified normal lamps.
Lighting lamps
To replace the top lamp, remove the transparent cover by
pressing it inwards with a tool (e.g. screwdriver) to free the
rear side hookings. At the same time, free the middle hook
and slide off the cover in the direction of the arrows.
To replace the bottom lamp, remove the transparent cover
by pressing the front hooking with a tool (e.g. screwdriver)
and at the same time pull in the direction of the arrow.
