13
EN
8 / LOADING THE REGENERATING SALT
EAU
SEL
A
B
C
Fig. 06
Important :
Use special salt for dishwashers. Never use
table salt or cooking salt as this could damage
the appliance.
Unscrew and remove the compartment cap.
Fill the compartment with special
dishwasher salt. Use the funnel supplied with
the dishwasher.
Firmly screw the cap back on.
The first time you fill the compartment with
salt,
fill it up to the top with water
.
• Determining the
regenerating
salt
level :
A scale on the display indicates the fill level.
C
B
A
full
almost
full
empty
(flashing)
Important :
If the salt overflows from the dispenser, remove the excess salt crystals to prevent risk of
the tank rusting and run a Soak programme or, failing this, a short programme (see page 18-19)
with no load in the dishwasher.
Firmly screw the compartment cap back on.
•
Loading the regenerating salt
. (Fig. 06)
Tip :
For especially soft water not requiring regenerative salt or when using “4-in-1” pellets, you
can deactivate the salt level detector (see page 11).
