20
Installing your hob in complete safety
- When the power is switched on, or
after a long power failure, a light code
appears on the control panel. This di-
sappears automatically after about 30
seconds or as soon as any touch
control is touched on the
panel. This is normal, as the display is
for use by the after-sales service when
required. The user must not take this
into account under any circum-
stances.If the unit has a 3 phase 400
V2N connection, and is not working
correctly, check that the neutral wire is
correctly connected.
This precaution should also be taken
for all your other electronic apparatus.
●
Your hob's electrical characteristics
Operating voltage............................................................230 V
∼∼
50 Hz
Total energy consumption....................................................10800
W
E
lectrical connections
The unit must be installed so that the mains
plug is easily accessible.
Hobs must be connected to the mains
by:
- A Type H05RRF power cable with three
2.5mm² or five 1.5mm² conductors
(including a green/yellow earth wire).
- A plug that complies with the CEI
60083 announcement or an all-pole cu-
tout unit with contacts that open by at
least 3mm.
This appliance meets European
Directives 73/23/CEE and 89/336/CEE.
1
L1
2
3
N1
4
1 , 5 m m 2
5
230V -2 cables
T e r r e
2 , 5 m m 2
L2
L3
N2
2 , 5 m m 2
2 , 5 m m 2
1 , 5 m m 2
1 , 5 m m 2
1
2
3
4
5
L1
L2
L3
2 , 5 m m 2
2 , 5 m m 2
2 , 5 m m 2
2 3 0 V 3
T e r r e
L2
1
2
3
4
5
L1
N
L3
1 , 5 m m 2
1 , 5 m m 2
1 , 5 m m 2
1 , 5 m m 2
4 0 0 V 3 N
T e r r e
2 , 5 m m 2
1 , 5 m m 2
32A
16A
16A
32A
fig A
Earth
Earth
Earth
99627381_ML_A.qxd 20/02/03 09:07 Page 20
