23
A beep and a flashing
0
show that the zone
concerned has been turned on.
You can then choose the desired power.
If you do not set the power, the cooking zone
will turn itself off automatically.
0
1...15
S
tart/Stop
S
etting power
Using your hob in all simplicity
If you use one of the rings at maximum
power on the induction side of the hob, the
other ring will automatically have its output
limited and the power displays will reflect this.
bip.
Low heat
7 = SIMMER
Moderate heat
11 = COOK
High heat
15 =
BRING TO BOIL
Maximum power
bo BOIL
VIGOROUSLY
A
djusting the time
S T A R T
CONTROL
3 , 4 s
You have 5 seconds before a default time appears automatically.
The clock goes out.
When you switch on
The clock blinks. Set the time
using the + and - controls.
S T A R T
CONTROL
20.10
Resetting the clock
Press on both the + and -
controls for 3-4 seconds and
then use the + and - controls
to adjust.
Operates when cooking zones concerned are
working. You can modify cooking times and any
time
0....99min
S
etting the timer
To stop the beep touch any control key in the
cooking zone concerned. It will stop by default
after about 1 minute.
manual stopping
automatic stopping
0
bip bip
0
0
99627342_ML_A.qxd 28/01/03 10:33 Page 23
