11
CONTROL PANEL DESCRIPTION
•
On/Off
3
3 / USING YOUR APPLIANCE
EN
Pressing the
button starts the hood in speed 1 (the
button is illuminated).
A long press on the
button turns the hood off.
Once the hood has started, you can modify the suction speed by pressing
for
speed 2 (
is lit) or
for speed 3 (
is lit).
The
function allows your hood to remain at maximum speed 4 for 10 minutes,
before switching back to speed 2.
•
Change speed
•
Configure recycling mode (or evacuation mode as an optional extra)
A long press (more than 2 sec) on the
and
buttons allows you to select
Evacuation or Recycle mode. The
and
buttons are lit and the
or
button
flashes.
A short press on
selects recycle mode (the
button flashes and the
button is
off).
A short press on
selects evacuation mode (the
button flashes and the
button is off.
A short press on
confirms the configuration (or automatic set after 10 sec).
The hood’s default mode is evacuation.
•
Cartridge filter saturated
The
button flashes (1 short flash) for 2 minutes after the hood stops to signal that the
cartridge filters must be cleaned (see section “Cleaning the cartridge filter”).
Give a long press (more than 2 sec) on
to unlock the “saturation” function.
•
Carbon filter saturated
The
button flashes (2 short flashes) for 2 minutes after the hood stops to signal that
the carbon filters must be cleaned (see section “Changing the carbon filter”).
Give a long press (more than 2 sec) on
to unlock the “saturation” function.
